Re: 2000 K1500 Sub - hood release


[ Follow Ups ] [ Post Followup ] [ OurSUV.com ]


Posted by OnBelay (76.84.30.52) on 18:24:36 01/11/11

In Reply to: Re: 2000 K1500 Sub - hood release posted by Peter

Removal Procedure

1. Lift the hood.

2. Remove the left hinge pillar trim panel.

3. Remove the cable handle underneath the instrument panel (IP).

4. Remove the cable end from the handle.

1. Use needle nose pliers in order to squeeze the tabs in order to remove the cable end from the hood latch assembly.
2. Lift the cable from the lock.



5. Pull the cable in toward the cable handle through the hole in the cowl.



6. Detach the cable from the retainer clips.



7. Disconnect the cable end from the hood latch assembly.

1. Use needle nose pliers to squeeze the tabs in order to remove the cable end from the handle.
2. Lift the cable from the lock.

Installation Procedure



1. Insert and pull the cable toward the front of the vehicle through the hole in the cowl.
2. Ensure that the grommet is seated.



3. Attach the cable end to the latch assembly.



4. Attach the cable to the retainer clips.
5. Attach the cable end to the cable handle.




6. Attach the cable handle underneath the IP.

Tighten the cable handle nut to 11 N.m (97 lb in).

7. Install the left hinge pillar trim panel.
8. Close the hood.



Follow Ups:



Post a Followup

Name:
E-Mail:
Subject:
Comments:
Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ OurSUV.com ]

OurSUV.com
Contact us         Home Page
? 2007 Copyright. All Rights Reserved