Re: ABS Dash Light Problem SOLVED!!

[ Follow Ups ] [ Post Followup ] [ ]

Posted by BurbGuy ( on 09:34:39 07/17/11

In Reply to: ABS Dash Light Problem SOLVED!! posted by drfife

Thanks for posting this. I hope I never need it, but if I do ...

Can the PDF be placed somewhere safe, so that we don't have to depend on to maintain it? The basic service bulletin number is #04-05-25-002.


: The ABS and Brake dash light would illuminate on my 2002 Suburban K2500 after driving for a few minutes. The ABS brakes would work properly in slick conditions, even with the lights illuminated.
: My code reader did not detect any codes.
: My mechanic's code reader did find a C0265 code.
: I found this GM Bulletin about the issue:
: I disconnected the battery, then disconnected the 2 wiring harnesses to the EBCM which is located on the inside of frame rail directly under the drivers seat. I traced the harness cables and found the frame ground. I removed the bolt, sanded and cleaned the connectors and frame, applied dielectric grease and re-torqued the bolt. For good measure I applied a small amount of dielectric grease to the 2 EBCM wiring harness connectors prior to reconnecting. Then reconnected the battery.
: The ABS and Brake dash lights no longer illuminate after driving!!
: Thanks goodness I found the simple fix to my problem. MUCH cheaper than replacing the EBCM ($1000!!).
: Russell
: Dallas, TX

Follow Ups:

Post a Followup

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ ]
Contact us         Home Page
? 2007 Copyright. All Rights Reserved