Re: Transfer Case DTC C0327 TXFR Case Encoder

[ Follow Ups ] [ Post Followup ] [ ]

Posted by OnBelay ( on 07:40:20 10/29/14

In Reply to: Re: Transfer Case DTC C0327 TXFR Case Encoder posted by Matt L.

: Thanks to all!
: Everything is apart. Part is due in tomorrow. Odd discovery during disassembly.
: Front differential is engaged. As in the yolk won't turn. I had to push the burb forward 6" to get the front driveshaft to clear enought to pull it forward. Any ideas? Is my front diff actuator shot too or did it just stop in the engaged position when the encoder died freezing the entire 4wd system in place?
: Lastly, should I be able to rotate the txfr case encoder shifting lug? It will rotate slightly against what feels like spring tension and rebound to its original position.
: New blue fluid going in too. Sadly its not blue anymore. I've been neglectful. Please don't call SPS (Suurban Protective Services)on me life has been terribly busy these past few years!
: Thanks again!
: Matt

Best guess is that the front is engaged because the actuator/encoder is telling it to be engaged. The fact that it is engaged when the actuator/encoder is telling the system it is NOT engaged is why you have a code.

And yes, you should be able to rotate it...from memory, about an 1/8 of a turn? Don't recall exactly how far it should move. Haven't messed with one for a long time.

Follow Ups:

Post a Followup

Optional Link URL:
Link Title:
Optional Image URL:

[ Follow Ups ] [ Post Followup ] [ ]
Contact us         Home Page
? 2007 Copyright. All Rights Reserved