Posted by Ben on January 08, 03 at 20:54:34:
Just back from running my braking route to check work fixing pulling problem.
Sticking caliper piston. So bad that it wouldn't hold the wheel to untorque the lug nuts. Normally easily hold for sweetie working the pedal while I wrench the lug nuts.
Freed it up enough to work for now, but will have to put in new caliper(s) soon. Now stops dead straight. Flushed 1 quart of Valvoline synthetic through both calipers.
Tried just about everything except bleeding ABS valves. Don't have scan tool to open the valves. Flush whole system min every other year, so there's fresh stuff in there most times.