Posted by Traveler on March 11, 03 at 10:30:34:
In Reply to: Re: Won't Start After Sitting for Just Two Days posted by BurbGuy on March 11, 03 at 09:11:23:
Current should be VERY low, well under 25 mA. Only needs to power some keep-alive circuits and receivers for remote entry, etc. Now that flash memory is used, the keep alive current is down, since flash does not require current for data retention. Other curents are leakages that are in microAmp range.
Time to start pulling fuses one at a time to isolate the cause of the drain.